
Young In Chromass
Water treatment system aquapuri Essence
Type II and III water from the water supply: capacity up to 30 l / h
aquapuri Essence is a compact system for obtaining laboratory water types II and III directly from tap water. The line covers the preparation of buffers and environments, washing, powering autoclaves and obtaining raw water for ultra-purification systems.
Request a quotationThe multi-stage circuit includes pre-cleaning, reverse osmosis and, in configurations 382/383, final deionization. The front display shows the state of the system, and the replacement cartridges are designed for easy maintenance; QR access leads to instructions for operating and replacing filters.
Models 380/381 produce Type III water at 15/30 l/h; 382/383 Type II and III water at 15/30 l/h. Type III claims resistivity ≥0.1 MOM·cm and conductivity ≤10 μSm/cm at 25 °C; Type II water at ≥10 MOM·cm Disposal of particles 99%, ion membrane RO 97–98%, organic matter ≥99 %. For feed water, pH 4–10 and conductivity <500 µS/cm, pressure 1-6 bar, turbidity <1 NTU and temperature 4-35 °C.
Water quality
- The Pre Pack removes particles larger than 10 microns, chlorine, ions, organics and bacteria up to 95%.
- RO Pack based on reverse osmosis removes up to 99% of ions, particles, organics and bacteria
- POST Pack I (Models 382/383) brings water to Class II, further removing ions and organics
Ease of operation
- Large front display with intuitive access to all functions
- QR access to ordering cartridges and video instructions for use
- Simple Filters Replacement Without Special Tools
- Long-lasting components reduce the frequency of service
Water productivity and quality
| Parameter | 380 | 381 | 382 | 383 |
|---|---|---|---|---|
| Class water | Type III (RO water) | Type III (RO water) | Type II/III (DI/RO water) | Type II/III (DI/RO water) |
| Performance at 25 °C | 15 l/h | 30 l/h | 15 l/h | 30 l/h |
| Specific resistance at 25 °C | ≥ 0.1 MOM·cm (≤10 μS/cm) | ≥ 0.1 MOM·cm (≤10 μS/cm) | ≥10 MOHm·cm | ≥10 MOHm·cm |
| Particle removal | 99% | |||
| Removal of ions by RO membrane | 97–98% | |||
| Removal of organic substances | ≥99% | |||
| Removal of bacteria | <50 CFU/ml | <50 CFU/ml | <0.1 CFU/ml | <0.1 CFU/ml |
Requirements for inlet (tap water)
| Parameter | 380 | 381 | 382 | 383 |
|---|---|---|---|---|
| pH | 4,0–10,0 | |||
| Conductivity | <500 μSm/cm | |||
| Pressure. | 1-6 bar (recommended >2 bar) | |||
| Turbidity | <1,0 NTU | |||
| Total content of dissolved salts | <350 ppm | |||
| Chlorine (after Pre Pack) | <0,1 ppm | |||
| TOC (total organic carbon) | <3 ppm (recommended <2 ppm) | |||
| Temperature | 4–35 °C |
