
Thistle Scientific
Power supply for electrophoresis series powerPRO
Programmable power supplies for horizontal and vertical electrophoresis: up to 300 W
Cleaver Scientific powerPRO is a programmable power supply for horizontal and vertical electrophoresis. The three-model range covers routine agarose runs, PAGE, IEF and high-current protein transfer without duplicating each configuration with a separate card.
Request a quotationThe sources are in constant voltage, current or power modes and automatically switch between limiting parameters. A color 2.4-inch display shows the current mode and run conditions. The user can save up to 30 programs in six steps and apply presets for Cleaver cameras. Five pairs of outputs allow you to power the current mode and run conditions. Multiple compatible cameras at the same time; timer, pause/renewal and protective features help to play long protocols.
powerPRO300: 5-300 V, 1-700 mA, up to 150 W. powerPRO500: 5-500 V, 1-800 mA, up to 300 W. powerPRO3AMP: 5-300 V, 10-3000 mA, up to 300 W. Setup resolution for the series is 1 V, 1 mA or 10 mA in the 3AMP model and 1 mW/1 W in power according to the table. Up to 30 software files are available in 6 steps; timer 1-999 minutes with a signal and continuous mode. parallel output pairs, power 100-240 V AC. Dimensions of each powerPRO model - 215×335×104 mm, weight about 2.1 kg. Implemented detection of the absence and leakage of load, protection against overheating and overload, as well as reaction to a sharp change in load.
Controls
- Operating in constant voltage, current or power modes with automatic switching between limiting parameters
- Colored 2.4-inch display shows current mode and run conditions
- Up to 30 saved programs in 6 steps, including presets for Cleaver cameras
Throughput
- Five pairs of outputs allow you to power multiple cameras at the same time
- Timer 1–999 minutes, pause and restart functions
Safety
- Detection of no load and leakage, protection against overheating and overload
- Reaction to a sudden change in load during the run
Electrical parameters
| Parameter | powerPRO300 | powerPRO500 | powerPRO3AMP |
|---|---|---|---|
| Maximum voltage | 5-300 V | 5-500 V | 5-300 V |
| Maximum current | 1-700 m | 1-800 m | 10–3000 mA |
| Maximum power | 150 W. | 300 watts | 300 watts |
| Installation authorization | 1 B/1 m | 1 B/1 m | 1 B/10 mA |
Operation
| Parameter | powerPRO300 | powerPRO500 | powerPRO3AMP |
|---|---|---|---|
| Programme programmes | up to 30 files in 6 steps | ||
| Timer | 1–999 min, continuous mode available | ||
| Number of exits | 5 pairs | ||
| Power supply | 100-240 In AC | ||
| Dimensions/mass | 215×335×104 mm, about 2.1 kg |
