Micro Solutions

Analytical solutions for your laboratory

RU
Okolab Heating and Cooling Stage Top incubation chamber

Okolab

Okolab Heating and Cooling Stage Top incubation chamber

Temperature of the sample from 10-15 °C below room to 60 °C on the microscope stage

Heating and Cooling Stage Top - Okolab camera on the microscope stage with an extended temperature range: from 10-15 °C below room to 60 °C thanks to a water jacket in the base and cover.

Request a quotation

Water circulates through the base and cover of the chamber, ensuring uniform heating and cooling of the sample below room temperature. Depending on the controller connected, the camera operates either in the heating area only (H101-BASIC-BL) or with cooling below room (H101-CRYO-BL). It's done through OKO-TOUCH touchscreen. Magnetic interchangeable inserts hold petri dishes, subject slides, and multi-well microplates, and perfusion ports allow microfluidic experiments to be connected.

The H101-BASIC-BL controller keeps temperatures from 3°C above room to 60°C; the H101-CRYO-BL controller extends the range downwards – 10–15°C below room temperature (depending on the model) – to 60°C. Accuracy ±0.1°C on sample feedback or ±0.3°C on camera at a stable room temperature. CO2 and O2 are maintained with accuracy. ±0.1%, programmable flow rate and gas cycles are available; humidification is bubbly with an efficiency of 75%, or active humidifier with an efficiency of 95%; heated supply line prevents condensation.

Temperature control

  • Water circulates through the base and cover of the chamber, reducing thermal gradients.
  • H101-BASIC-BL controller: 3°C above room to 60°C
  • H101-CRYO-BL controller: 10–15 °C below room (depending on model) to 60 °C
  • Accuracy ±0.1 °C in sample feedback, ±0.3 °C in camera at stable room temperature

Gas and humidity

  • CO2 and O2 are maintained with ±0.1% accuracy, programmable flow rates and cycles are available
  • Bubble moisturizer with efficiency of 75%, option of active humidifier - 95%
  • Heated supply line prevents condensation

Operation

  • Control via the OKO-TOUCH touch screen: power, temperature and gas programming, data recording
  • Magnetic interchangeable inserts under petri dishes, subject slide and multi-well microplates
  • Built-in ports for perfusion under microfluidic experiments
  • Compatible with water-based objective heaters and Smart Box

Temperature

ParameterHeating and Cooling Stage Top
Range (H101-BASIC-BL)3 °C above room to 60 °C
Range (H101-CRYO-BL)10-15 °C below room to 60 °C
precision± 0.1 °C (sample) / ± 0.3 °C (camera)

Gas environment and humidity

ParameterHeating and Cooling Stage Top
Precision of CO2/O2±0,1%
Moisturizingbubble, 75%; active humidifier - 95%

Management and compatibility

ParameterHeating and Cooling Stage Top
Interface.Touchscreen of OKO-TOUCH
Sample formatsPetri plates, subject slides, multi-well plates (magnetic inserts)
Additionally.Perfusion ports; compatibility with water objective heaters, Smart Box