Micro Solutions

Analytical solutions for your laboratory

RU
Incubation camera on the entire Okolab Cage Incubator microscope

Okolab

Incubation camera on the entire Okolab Cage Incubator microscope

Polycarbonate shell for full microscope: temperature, CO2/O2 and humidity around the entire optical system

The Cage Incubator is an Okolab polycarbonate casing that completely covers the microscope for stable temperature, gas composition and humidity around the entire optical system during long lifetime photography.

Request a quotation

A removable polycarbonate panel skin on a steel frame surrounds the microscope as a whole, including the table. The sliding front doors and side panels allow access to the device without disassembly of the camera, and the removable front panel on rotary loops makes maintenance easier. Optional black panels are used for shooting in dark conditions, and the built-in front panel is used for shooting in dark conditions. LED lighting with foot pedal and brightness adjustment makes it easier to work inside the camera, the system is suitable for most models of microscopes and is equipped with inserts under the XY table and piezo drive.

The temperature is maintained in the range from 3 °C above room to 45 °C with an accuracy of ±0.1 °C. The gas composition is controlled by digital or manual CO2 and/or O2 controllers. Humidity is provided by a vibration-resistant moisture module or an active humidity controller. Optionally available TTL signal for synchronization with external equipment.

Design

  • A polycarbonate casing on a steel frame covers the entire microscope, including the table.
  • Sliding front doors and side panels for access to the device
  • Removable front panel on rotary hinges
  • Optional black panels for shooting in blackout
  • Built-in LED-lighting with foot pedal and brightness adjustment

Environmental control

  • Temperature from 3 °C above room to 45 °C with an accuracy of ±0.1 °C
  • CO2 and/or O2 controllers in digital or manual design
  • Vibrous humidification module or active humidity controller

Compatibility

  • Suitable for most microscope models
  • Inserts under the XY-table and piezo
  • TTL signal is available as an option

Temperature

ParameterCage Incubator
Range.3 °C above room to 45 °C
precision±0,1 °C

Gas environment and humidity

ParameterCage Incubator
CO₂/O₂digital or handheld controllers
Humidityvibrating moisture module or active controller

Materials and construction

ParameterCage Incubator
Leatherpolycarbonate
Framesteelwork