
Kugel
Sectional table with hood STV 10/850
Height-adjustable sectional table with built-in hood for pathology and histology
KUGEL medical STV 10/850 is a height-adjustable sectional table with a built-in hood for pathoanatomical and histopathological laboratories. Downstream air removal through a perforated work surface helps localize odors and aerosols directly in the opening and cutting area.
Request a quotationA three-section removable perforated surface directs the polluted air down to the building's plug-in exhaust system. The electromechanical drive smoothly adjusts the operating height with up/down buttons, and the system synchronously controls the two lift columns: an integrated organ pool with a sieve, a drain-sloping pallet and a permanent system. Irrigation simplifies the removal of liquids and cleaning, including a knee mixing fitting, a three-meter hose with a hand shower, two waterproof outlets and pre-mounted communications.
Dimensions - 2600×850×750−1050 mm Material - polished stainless steel 1.4301 / AISI 304. Power supply - 230 V, 1 phase, 50 Hz Minimum consumption of the plug-in exhaust system - 1000 m3 / h Allowable lift load - 300 kg Built-in pool - 400×500×200 mm Type - STV 10/850, article 010.010.850. Connection to the hood of the building and Drinking water protection devices according to DIN 1988 Part 4 / EN DIN 1717 are provided for the design of the premises.
Extract and ventilation
- A three-section removable perforated surface directs the polluted air down to the building's exhaust system.
- Minimum consumption of the connected exhaust system - 1000 m3 / h
ergonomics
- Electromechanical drive smoothly adjusts the working height with up/down buttons
- Synchronous control of two lifting columns in the range of 750-1050 mm
Fluid management
- Built-in organ pool with sieve, pallet with a slope to drain, permanent irrigation system
- Knee mixing fittings, three-meter hose with hand shower, two waterproof sockets
Dimensions and construction
| Parameter | STV 10/850 |
|---|---|
| Dimensions (L×W×H) | 2600×850×750–1050 mm |
| Material | 1.4301 stainless steel / AISI 304, grinded |
| Organ pool | 400×500×200 mm |
Extract and power supply
| Parameter | STV 10/850 |
|---|---|
| Minimum exhaust system consumption | 1000 m3/h |
| Power supply | 230 V, 1 phase, 50 Hz |
| Permissible lifting load | 300 kg |
| Type/article | STV 10/850, art. 010.010.850 |
