
Kugel
Section table ST 10/200
Rotating sectional table for morgues and pathoanatomical departments
KUGEL medical ST 10/200 is a rotating stainless steel sectional table for pathological and forensic departments. The central support frees up space around the work area, and turning the worktop allows you to adapt the position of the table to the layout of the room and the workflow.
Request a quotationThe countertop rotates about 180 degrees from the center column to the right and left, and is fixed by a quick-click mechanism. The high profiled side, diagonal gradient and drain directs the fluids to the built-in organ pool with a transfusion tube and a sieve. The knee mixing fitting, a three-meter hose with a hand shower and two. Waterproof outlets are included in the equipment; electrical and water communications are laid inside the support and are accessible through a service hatch.
Dimensions - 2600×850×850 mm Material - polished stainless steel 1.4301 / AISI 304. Built-in pool - 400×500×200 mm. Acceptable load - 300 kg; optionally available execution for 450 kg Power - 230 V, 1 phase, 50 Hz Type - ST 10/200, article 010.010.200; reinforced execution 450 kg - article 010.010.858. Devices required DIN 1988 Part 4 and EN DIN 1717 are provided on the side of the facility.
ergonomics
- The countertop turns right and left about 180° and is fixed by a quick-clamping mechanism.
- The central support frees up space around the work area and simplifies the approach to the table.
Fluid management
- High profiled board and diagonal slope direct liquids to drain
- Built-in organ pool 400×500×200 mm with overflow tube and sieve
Equipment
- Knee mixing fittings and three-meter hose with hand shower
- Two waterproof outlets; communications are laid inside the support with access through the service hatch
Dimensions and construction
| Parameter | ST 10/200 |
|---|---|
| Dimensions (L×W×H) | 2600×850×850 mm |
| Material | 1.4301 stainless steel / AISI 304, grinded |
| Organ pool | 400×500×200 mm |
Performance parameters
| Parameter | ST 10/200 |
|---|---|
| Permissible load | 300 kg (optional 450 kg) |
| Power supply | 230 V, 1 phase, 50 Hz |
| Type/article | ST 10/200, art. 010.010.200; reinforced performance of 450 kg - art. 010.010.858 |
