770–1070
mm, range of altitude
Micro Solutions / Life Science
Sectional table with hood STV 10/850 ROLL-IN
Table with end loading of the body on the pallet, built-in hood and height adjustment
Product overview
- STV 10/850 ROLL-IN
- Kugel
- Germany
- STV 10
- STV 10/850 ROLL-IN
Table with end loading of the body on the pallet, built-in hood and height adjustment
integrates transportation, positioning and local air removal in one workplace
KUGEL medical STV 10/850 ROLL-IN is an adjustable sectional table with built-in body hood and loading directly on a removable pallet. The solution reduces the number of shifts and combines transportation, positioning, local air removal and sanitation in one workplace.
The body tray is inserted from the end of the table; the built-in flap automatically closes the loading opening. The three-section perforated work surface directs the polluted air down to the building's hood, and underneath it is a pallet with a slope to the drain. The electromechanical actuator regulates the working height. The equipment includes an organ pool with a vent. Overflow tube and sieve, knee mixing fittings, three-meter hose with heavy hand shower, two waterproof sockets and a valve of the irrigation system. LM 80/100-AL pallet is purchased separately.
Dimensions - 2656×850×770-1070 mm Material - polished stainless steel 1.4301 / AISI 304. Minimum consumption of the plug-in exhaust system - 1000 m3 / h Allowable lift load - 300 kg; optionally - 450 kg Power - 230 V, 1 phase, 50 Hz Organ pool - 400×500×200 mm Type - STV 10/850 ROLL-IN, article 010.010.870; reinforced The execution is Article 010.010.858, where the hood and drinking water protection devices are connected at the facility.
Key figures
1000 m3/h
min-extract
300 kg
load (450 kg of optz)
Applications
- Autopsy
- Autopsy
- Macroscopy and extraction
- Pathological and histopathological laboratories
Models and configurations
- STV 10/850 ROLL-IN
Product details
STV 10/850 ROLL-IN
pallet-loading
Loading unit
load-hole
Loading and transportation
- A body pallet is inserted from the end of the table; the built-in valve automatically closes the loading opening.
- LM 80/100-AL pallet purchased separately
Extracting and ergonomics
- A three-section perforated work surface directs the polluted air down to the building's hood.
- Electromechanical drive adjusts the working height in the range of 770-1070 mm
Fluid management
- Organ pool with overflow tube and sieve; pallet under the working surface with a slope to drain
- Knee mixing fittings, three-meter hose with heavy hand shower, valve of irrigation system
Dimensions and construction
| Dimensions (L×W×H) | 2656×850×770–1070 mm |
|---|---|
| Material | 1.4301 stainless steel / AISI 304, grinded |
| Organ pool | 400×500×200 mm |
Extract and power supply
| Minimum exhaust system consumption | 1000 m3/h |
|---|---|
| Power supply | 230 V, 1 phase, 50 Hz |
| Permissible lifting load | 300 kg (optional 450 kg) |
| Type/article | STV 10/850 ROLL-IN, art. 010.010.870; reinforced performance - art. 010.010.858 |
Supplies
Sub-pall LM 80/100-AL
Booting pallet for transporting and introducing the body into the table
Related equipment types
- Sectional tables
- Tables for organs and accessories
- Morgue cooling chambers
- Cutting stations
Related products
- Kugel STV 10/850 — Cutting stations
Classification
- Histology and cytology
- Equipment of morgues and pathological departments
- Cutting stations
- Histological and pathomorphological equipment
- Pathology Department and morgue
- Sectional and dispensing tables
- STV 10/850 ROLL-IN