
Kugel
Section table ST 10/300
Stationary sectional table on the central column for a permanent workplace
KUGEL medical ST 10/300 is a stationary sectional table on the central assembly column for the pathological and forensic units. The bottom-closed countertop, factory communications preparation and free space around the support make it easier to equip a permanent workplace.
Request a quotationThe high profiled side and diagonal slope direct fluids to the drain and the built-in organ pool, the pool is equipped with a overflow tube and a sieve, and the drain of the working surface with an additional catch sieve. The knee mixing fitting, a three-meter hose with a hand shower and two waterproof sockets are standard. Water and electrical communications are pre-mounted inside the central column and are accessible through an audit hatch.
Dimensions - 2600×850×850 mm Material - stainless steel 1.4301 / AISI 304. Organ pool - 400×500×200 mm. Allowable load - 300 kg; optionally - 450 kg. Power - 230 V, 1 phase, 50 Hz. The countertop has a closed bottom surface with a waterproof noise-absorbing layer. Type - ST 10/300, article 010.010.300; reinforced version – article 010.010.858. DIN 1988 Drinking Water Protection Part 4 is provided on the site side.
Design
- A closed tabletop with a water-resistant noise-absorbing layer
- Free space around the central support makes it easier to equip a permanent workplace
Fluid management
- High profiled board and diagonal slope direct liquids to drain
- Built-in organ pool with overflow tube and sieve; additional catching sieve on top drain
Equipment
- Knee mixing fittings, three-meter hose with hand shower, two waterproof sockets
- Water and electrical communications are pre-mounted inside the column, access through an audit hatch
Dimensions and construction
| Parameter | ST 10/300 |
|---|---|
| Dimensions (L×W×H) | 2600×850×850 mm |
| Material | stainless steel 1.4301 / AISI 304 |
| Organ pool | 400×500×200 mm |
Performance parameters
| Parameter | ST 10/300 |
|---|---|
| Permissible load | 300 kg (optional 450 kg) |
| Power supply | 230 V, 1 phase, 50 Hz |
| Type/article | ST 10/300, art. 010.010.300; reinforced execution - art. 010.010.858 |
