
DLab Scientific
Dry bath HB105-S1
Single-block dry bath with heating up to 105 °C and unloading measurement history via USB
DLAB HB105-S1 is a digital dry bath with one heating unit, heating up to 105 °C and uploading measurement history over USB to monitor laboratory protocols.
Request a quotationThe device heats and holds samples at a given temperature and time under the control of an external sensor. The USB interface allows you to unload the measurement history, and the audible signal announces the end of the timer. The block cover reduces heat loss and protects samples from contamination.
According to the official manufacturer's card, the temperature setting range is 25-105 ° C, the adjustment accuracy is ± 0.3 ° C in the range of 25-90 ° C and ± 0.6 ° C in the range of 90-105 ° C, the uniformity at 37 ° C is ± 0.2 ° C. The timer is set from 0 minutes to 99 hours 59 minutes. Power 100 W; power 110/220 V, 50/60 Hz; dimensions 290×210×120 mm; weight 3.2 kg.
Accuracy and control
- Temperature setting range 25-105 °C
- Accuracy ±0.3 °C in the range of 25–90 °C and ±0.6 °C in the range of 90–105 °C
- Uniformity at 37 °C ± 0.2 °C
- External temperature sensor
Ease of use
- LED display with a display pitch of 0.1 °C
- Time from 0 minutes to 99 hours 59 minutes
- USB-interface for uploading the history of measurements
- Audible signal at the end of the timer
Safety
- Protection against overheating
- Block cover to keep heat and protect against pollution
Temperature
| Parameter | HB105-S1 |
|---|---|
| Temperature setting range | 25–105 °C |
| Precision of regulation | ±0,3 °C (25–90 °C); ±0,6 °C (90–105 °C) |
| Uniformity at 37 °C | ±0,2 °C |
| Temperature display step | 0,1 °C |
Timer and display
| Parameter | HB105-S1 |
|---|---|
| Timer | 0 min - 99 hours 59 min |
| Display | LED |
| External temperature sensor | Yes |
Power supply and dimensions
| Parameter | HB105-S1 |
|---|---|
| Power | 100 W. |
| Power supply | 110/220 V, 50/60 Hz |
| Dimensions (W×D×H) | 290 × 210 × 120 mm |
| Weight | 3.2 kg |
