Micro Solutions

Analytical solutions for your laboratory

RU
Microcentrifuge D3024

DLab Scientific

Microcentrifuge D3024

High-speed desktop microcentrifuge: up to 15,000 rpm and 21,380xg

DLAB D3024 is a high-speed desktop microcentrifuge with a wide range of bio-hermetic rotors for test tubes, PCR strips and samples up to 5 ml. Dual-circuit air cooling and autoclavable aluminum rotors are designed for intensive laboratory work.

Request a quotation

The centrifuge is designed to isolate DNA, RNA and proteins, sample preparation in molecular biology, clinical chemistry and microbiology. RPM/RCF switching, short pulse start, continuous mode and sound alert are available. Three-layer rotor sealing reduces the risk of sample leakage; cap locking, speed control and sound alert. Internal diagnostics support safe operation: five rotors and adapters cover microtubes of 0.2-2 ml, PCR strips and 5 ml tubes.

Speed range 200-15,000 rpm in 10 rpm increments; maximum acceleration 21 380 × g in 10 × g increments; speed accuracy ±20 rpm. Capacity depends on the rotor: 24 × 1.5/2 ml, 36 × 0.5 ml, 4 × PCR-8, 12 × 5 ml with a conical bottom or 18 × 5 ml with a round bottom. Time 30 seconds-99 minutes or continuously; acceleration and braking for 25 seconds. Brushless DC motor; Noise level not exceeding 64 dB. Dimensions 280×364×266 mm; mass 12 kg; power 200 W. High-strength aluminum rotors autoclave at 121 °C for 20 minutes.

Throughput

  • Speed 200-15 000 rpm in increments of 10 rpm, accuracy ±20 rpm
  • Acceleration to 21,380xg in 10xg increments
  • Short pulsed start and continuous mode

Safety

  • Locking the cover, speeding control and built-in diagnostics
  • Three-layer rotor seal reduces risk of sample leakage
  • Brushless DC-motor without maintenance

Flexibility

  • Five rotors and adapters for microtubes 0.2-2 ml, PCR strips and tubes 5 ml
  • Autoclavable aluminum rotors

Throughput

ParameterD3024
Speed range200–15 000 rpm (step 10 rpm)
Accuracy of speed±20 rpm
Maximum acceleration21 380×g (step 10×g)
Centrifugation time30 s – 99 minutes continuously or continuously
Acceleration/braking25-sec

rotors

ParameterD3024
Rotor capacity24×1.5/2 ml; 36×0.5 ml; 4×PCR-8; 12×5 ml (conical bottom); 18×5 ml (round bottom)
Autoclaving of rotors121 °C, 20 mins

General characteristics

ParameterD3024
Engine.brushless DC
Noise levelnot more than 64 dB
Dimensions (W×D×H)280×364×266 mm
Weight12 kg
Power200 watts