Micro Solutions

Analytical solutions for your laboratory

RU
SafeGrow PRO CO2 incubator

BioAir

SafeGrow PRO CO2 incubator

Direct heating incubator for 140 liters of usable volume with automatic decontamination at 125 °C

SafeGrow PRO is a direct-heating BioAir CO2 incubator for stable cell and tissue culture, including primary and stem cells, hybridomas and ART processes. The 140-liter camera combines precise environmental control, convenient cleaning and automatic high-temperature decontamination.

Request a quotation

Four independently controlled direct heating circuits and seven temperature sensors maintain uniformity on the six sides of the chamber without an internal fan. Solid state IR sensor measures CO2 regardless of humidity and supports AutoZero. Humidity is created passively by a removable stainless steel pallet. Seamless A large-angle, electropolished camera and a fully removable shelf system make cleaning easy: a programmable cycle heats the camera to 125°C, a log saves 500 events, and an RS-232 allows you to transmit parameters and alarms to an external monitoring system.

Total/useful volume - 188.6/140 L. Operating temperature range - 10–50 °C, not less than 1 °C above room; regulation and accuracy - ±0.1 °C, declared uniformity - about ±0.3 °C, recovery after a 15-second door opening - up to 5 minutes CO2 range - 0.5–20% increments of 0.1%; regulation - ±0.1%, accuracy - ±0.2% at a rate of 5%, recovery - up to 5 minutes. Humidity - up to 95% RH. Decontamination: 125 ° C, exposure 4 hours, full cycle 10.5-13.5 hours. Camera - 530×690×500 mm, external dimensions - 680×896×746 mm, weight - 102 kg. Four shelves 510×455 mm, area of each - 0.23 m2. Power - 220-240 V, 50/60 Hz; installed power - 1.5 kW, maintenance 37 ° C - <0.1 kW.

Stability of the environment

  • Four independently controlled direct heating circuits and seven temperature sensors provide uniformity on the six sides of the chamber without an internal fan.
  • Solid-state IR sensor measures CO2 regardless of humidity and supports AutoZero function
  • Humidity up to 95% is created passively by a removable stainless steel pallet.
  • Recovery of parameters after 15-second door opening - up to 5 minutes

Hygiene and decontamination

  • Seamless electropolished camera with large radii of corners makes cleaning easier
  • Fully removable system of shelves and holders without tools
  • Programmable cycle heats the chamber to 125 °C with exposure of 4 hours; full cycle – 10.5–13.5 hours
  • Possibility of installation in a stack of two incubators

Control and data

  • The magazine saves the last 500 events available on the display
  • Exporting RS-232 data to connect to external monitoring system
  • The door is hung on the right or left (chosen when ordering)

Camera and volume

ParameterSafeGrow PRO
Total/Useful volume188.6/140 l
Internal dimensions of the chamber530×690×500 mm
Number of shelves4, size 510×455 mm, area 0.23 m2 each

Temperature and CO2

ParameterSafeGrow PRO
Temperature range10–50 °C (at least 1 °C above room)
Accuracy of temperature control±0,1 °C
Temperature uniformityabout ±0.3 °C
CO2 range0.5–20 percent increments of 0.1%
Precision of CO2±0.2% at 5%
Humidityup to 95% RH

Decontamination and power supply

ParameterSafeGrow PRO
Decontamination temperature125 °C, exposure 4 hours
Complete decontamination cycle10.5-13.5 hours
Dimensions (WxVxG)680×896×746 mm
Weight102 kg
Power supply220–240 V, 50/60 Hz
Installed capacity1.5 kW
Consumption while maintaining 37 °C<0.1 kW