AHN Biotechnologie
Controller of serological pipettes CAPP Tempo
Motorized pipette controller with separate speed control and electronic brake
Motorized CAPP Tempo controller for fast and controlled pipetting with serological pipettes.
Request a quotationSeparate adjustment of aspiration and dosing rate combines fast dialing with a precise approach to the required volume. The electronic brake switches the device to low speed with one stroke, the LED display shows the mode and battery charge.
Compatible with glass and plastic serological pipettes 0.1-100 ml. Six aspiration rates and six dosing rates; 25 ml are recruited in about 5 seconds at the sixth speed. Lithium-ion battery provides up to 8 hours of continuous operation and allows operation during charging.
Accuracy and speed
- Separate adjustment of aspiration rate (levels 1-6) and dosage (G-5)
- Electronic Brake (EBS) instantly reduces speed to a minimum for precise stop at the desired volume
- Mechanical speed adjustment with a finger on a trigger in addition to electronic speed control
Autonomy
- Lithium-ion battery 1400 mAh / 3.7 V provides up to 8 hours of continuous operation
- Full charging through the wall charger takes about 4 hours
- The device can be used during charging on the stand
Convenience and service
- Segment LCD display shows mode (ASP/DISP) and charge level
- Silicone pipette holder and nasal cone are autoclaved at 121°C
- Hydrophobic filter 0.2 μm protects the device from ingress of liquid
pipetting
| Parameter | Tempo T100-B |
|---|---|
| Compatible pipettes | glass and plastic, 0.1-100 ml |
| Aspiration rate | 6 levels (1-6) |
| Dosing rate | 6 levels (G-5, where G is dosing under gravity) |
| EBS (electronic brake) | reduces the rate of aspiration / dosage to a minimum |
Power supply
| Parameter | Tempo T100-B |
|---|---|
| Battery. | Li-ion 1 400 mAh / 3.7 V |
| Time to work. | up to 8 hours of continuous operation |
| Charger | input ~100-240 V, 50/60 Hz; full charge ~4 h |
Service
| Parameter | Tempo T100-B |
|---|---|
| Filter | hydrophobic, 0.2 μm |
| Autoclaving of holder and cone | 121 °C |
| Storage temperature | from -20 °C to +50 °C |
| Display | segmental |